LightHouse 4 Update for Axiom Chartplotters

New Features

• LightHouse Polar Manager for sailing vessels - import custom polars from CSV
• Evolution autopilot steer-to-wind control from Axiom
• Automated DST810 speed calibration sequence
• Graphical and numerical wind shift indicators
• Wind-based sail recommendations displayed as popup alerts or data items.  Import a custom sail plan from CSV
• Mirrored tack angle lay line display
• Expanded data damping for heading, depth, speed, wind angle, wind speed
• Alpha Performance Display integration and remote control
• RSW Wind Transducer integration and diagnostics
• Radar drag-and-drop cursor
• Notification improvements for software updates, software change log, chart compatibility warnings, and tidal data out-of-date.
• NMEA 0183 diagnostics page and buffer display for Axiom Pro and XL
• Rhodan Marine trolling motor control from Axiom sidebar
• SiriusXM Weather marine zones update
• Navionics Dock-to-dock Route Guidance now subscription-free

Resolved Issues & Improvements

• False "No Transducer Connected" message for RealVision 3D transducers corrected
• ClearCruise Object Detection for M300-series cameras fixed
• Roll correction image cropping fixed on FLIR M232, M300-series cameras
• Axiom 2 rotary controller now controls chart range scale
• AIS target data screen cropping resolved
• Find Nearest marina search no longer returns duplicate items
• Sector search pattern leg time improvements
• YachtSense Link Router integration improvements for diagnostic logs, wake on LAN, software update, hotspot login, MFD discovery, and wired internet connectivity
• Improvements to temporary storage and removal of downloaded software updates to SD card media
• Improved Power Over Ethernet diagnostics
• Improvements supporting network hardware dependent LightHouse Apps
• Navionics panoramic photo presentation improvements
• Yamaha 6YG gateway fuel remaining data improvements
• AnyDesk remote access improvements for Axiom 2 series units

New Updates

• Resolved a pan & tilt control issue with cameras
• Home button was missing from the LightHouse menu, with all pan & tilt cameras
• Discovered & fixed a crash when using Augmented Reality (AR200) with LH4.4.70.
• Identified & Resolved an issue with AXIOM 2 Pro not upgrading via “check online” software update.
• Included updated Netherlands translations for LightHouse O/S
• Corrected an issue on AXIOM 2 Pro/XL where internal cartography was not being shared across network
• Resolved an issue when viewing only SideVision & Chart (split screen), where the RealBathy was not functioning (due to lack of depth)
• LightHouse Charts Premium expiry date modified within the Chartplotter to provide 30 day warning when the Premium is due to expire

LH4.4.70

Download LH4.4.70

Important: Any AXIOM 2 Pro running LH4.3.54 will have to install this version (LH4.4.70) first, before upgrading to the latest version of LightHouse software.

New Features

• Mode-based home screen app icons
• Fischer Panda generator support via NMEA 2000
• Manual frequency tuning for Airmar CHIRP transducers
• 50/50 sonar zoom mode and improved pinch controls
• Autopilot automatic turn to next waypoint
• Mercury VesselView app improvements
• "Stop Nav" on-screen icon
• YachtSense Link Internet status icon added 
• Updated sailing polars database with over 70 new boats added

Resolved Issues & Improvements

• ARPA tracking increased to 100 targets (with compatible scanners)
• Sonar bottom tracking improvements
• Improved fish target intensity for CP370/470/570 sonar modules
• Dashboard app font correction for Axiom 9
• Lumishore intermittent app detection corrected
• AIS alarm improvements
• FLIR M300 blending level indicator fixed
• FLIR M232 object range estimations improved
• Axiom 7 ClearCruise controls missing in split window, fixed
• CAM200, 210, 220 internal web page display improvements
• CAM300 video improvements
• M-Series thermal camera control loss, fixed

Upgrade Note: Axiom 2 Pro users must upgrade to LightHouse 4.4.70 before upgrading to any future LightHouse releases. 

New Features

• Initial Release for the Axiom 2 Pro and RVM1600 SONAR:
  • Axiom 2 Pro 9 S/RVM
  • Axiom 2 Pro 12 S/RVM
  • Axiom 2 Pro 16 S/RVM
  • RVM1600

Resolved Issued & Improvements

• Resolved an issue  where YachtSense Digital Switching modules were intermittently not detected in LightHouse 4.3.42
• Resolved an issue where certain 3rd party apps were not working in LightHouse 4.3.42, such as Scheiber
• Various LightHouse Chart improvements, including:
  • Resolved an intermittent crash when selecting a date in Tides mode
  • Resolved an intermittent crash when selecting a current station
  • Update to ensure drying station data appears (possible to see no data in the previous LH4.3.42)
  • Corrects an issue where tide data is not visible on the chart

Note: - LightHouse Charts will also require updating to work with these improvements

• Resolves an issue with Navionics cartography showing Points of Interest names incorrectly

New Features

• Support for the Australia and New Zealand region LightHouse Charts
• Australia Tides and Currents displayed (only when running LH4.3.42 or higher)
• Updates to Points of Interest
• Mercury Updates
• Rudder bar indicator
• EchoPilot FLS 3D Gen4 support
• Fishfinder user interface improvements – transducer channel in use

Resolved Issues & improvements

Chartplotter:

• Certain apps were not appearing on the Apps page when the hardware was connected
• Tide/Current information improvements, including tables & graphs
• Bar along the top of the home screen when the background image is turned off
• General enhancements to Points of Interest (POI) when shown on the chart and when performing searches
• Streets in the WEU LH Chart region were seen to be blinking
• Modified the size of some data box text on the AXIOM 9 to make it more viewable
• The “Route Complete” message now shows correctly when the last waypoint reached
• Certain conditions could prevent the chart plotter from ejecting the MicroSD card
• When you disabled the battery alarms (using the toggle button), they still remained active
• Improvements to Translations within menus
• Modified the Anchoring dialog text to make it more obvious what state it is in
• Anchor Mode activation was causing a crash
• HDMI in modifications to resolve dropped frames on AXIOM XL
• Data in the sidebar was seen to be flickering every ~4sec & ~24sec.

Software Updates:

• Various minor improvements to the Chart Plotter upgrade sequence
• Resolved an issue where the Chart Plotters could incorrectly program an E22158 Converter
• Resolved a miss-leading pop-up where “Transducer not connected” was displayed after an upgrade

Radar:

• Updates to Quantum/Quantum2 WiFi channel changes – the Radar needs to be running v2.50 or higher
• Improvements to Target Intercept information from Radar targets
• Resolved an issue with Guard Zones when using a Cyclone Radar in Doppler mode
• Improved the image from the Cyclone Radar, running in Dual Range & Split Screen on the Chart Plotter
• Mode settings corrected when using legacy Digital Radars

Cameras:

• The M300 now correctly changes state when selecting Low Light mode on the Chart Plotter
• Improvements to the Augmented Reality image when using Night/Dark pallets
• Image Flip and mirroring options added to the software

SONAR / Fishfinder:

• SONAR improvements to displayed target strength
• SONAR UI improvements to make it obvious which channel is in use
• Corrected a SONAR menu issue when selecting “All Channels.”
• Fixed a SONAR display issue, where the history changed when the screen was touched

System Improvements:

• Improved the RMK-10 communications with the chart plotter, where it was intermittently not working as expected
• “Incompatible Chart” error pop-up when loading LightHouse charts onto a MicroSD card using a MAC

Resolved Issues and Improvements

• The AnyDesk app now continues to function when exiting the apps page
• The Spotify app now continues to function when exiting the apps page
• Resolves an issue seen with Scheiber (ShipControl) systems
• Implemented a modification to the battery instancing detection to prevent Battery 0 from potentially showing dashes
• Improvements to the screen mirroring feature in the Raymarine App

Key Features and Enhancements

• Support for Mercury fluid level checking and Skyhook virtual anchoring in the VesselView app.
• Expanded NMEA2000 battery monitoring. Detect, monitor, alarm, and set customized names for compatible batteries connected to the network.
• Expansion of our built-in sailing polars library with the addition of 60 new boat models.
• Updated GPS/GNSS engine software for Axiom +, Pro and XL models.

Resolved Issues and Improvements

• Smoother blending of SiriusXM weather radar and sea surface temperature overlays.
• Expanded library of species-specific fish icons for marking waypoints.
• Improved rudder reference information when used with a Volvo Easy Connect gateway.
• Radar app 'Auto Acquire Targets' dialogues improved.
• Fixed an issue with cross track error on the rolling road dashboard display.
• Improved the diagnostic sonar recording feature.
• Resolved a communication issue between RMK keypad units and Axiom.
• Sonar app bottom tracking and reacquisition improvements.

• Resolves the upgrade 'Blank Screen' that is displayed during a software update of the Chart Plotter. Once LH4.00.85 is installed, any future upgrades will not show a blank screen
• Software changes to support component changes in the Axiom family of chartplotters
  Note: There is no upgrade for the RVX1000 SONAR module with this release, so it must be running v4.0.82 software to be compatible with AXIOM LH4.00.85

Software enhancement to resolve a potential scenario where the LightHouse chart is not displayed.

Notes - A single use of the LightHouse Chart Store Premium features prevents this issue from occurring. Upgrading to LH4.00.82 also resolves this issue.

Resolved issues and improvements:

• Large system stability improvements
• AXIOM reboot when within the Chart app and using Navionics cartography
  This issue can be triggered a variety of ways unfortunately, examples being:
  • When opening the waypoint or route window, in order to start a "Go-To"
  • When viewing the AIS target list or changing AIS settings
  • When re-sizing the Chart window
  • and other such scenarios such as opening a window/menu within the chart app...
• M2XX thermal camera Pan/Tilt movement incorrect
• No rudder angle displayed if the source is the E22158 SeaTalk1 to SeaTalkng converter or a 3rd party rudder angle products

New Features:

• Mercury Sport Exhaust
• Mercury Advanced Engine
• Mercury on board diagnostics
• Mercury Steering Angle
• LH4.0 graphical refinements including custom backgrounds and menu mode improvements
• Dynamic Dashboard tiles
• Support for Fish Symbols on CP100/CP370/CP470/CP570
• SIRIUSXM Fish Mapping
• SIRIUSXM Weather Legend
• SIRIUSXM Weather Sea Surface Temperature
• Multizone audio for Rockford Fosgate and JL Audio
• Navionics - SonarChart history
• Navionics - Multi Layer control (for Relief Shading or SonarChart shading)
• Spotify removed from main software bundle - can now download app from Raymarine website
• Imray Raster Chart support
• Active waypoint and route visual enhancements
• YachtSense Link - router support

Resolved Issues & Improvements:

• Navionics Library update
• Bottom Lock Improvements - RVX1000 and AXIOM Internal SONARs
• Network list now shows the RMK-9/RMK-10 products when connected on RayNet
• Network list now shows the Camera JCU-3 when connected on RayNet
• Heading vector was only shown when 'infinite' was selected
• Chart Plotter could incorrectly create duplicate lighthouse_id files on MicroSD cards
• Spotify menus not functioning in LH3.16.84. Requires downloading the new Spotify App
• AXIOMs can stop responding to paired RMK-10/RMK-9 (RMK's require v20.0.15app/18.0.48plat)
• SIRIUSXM Weather Overlay - obscures Navigation Map
• LH3.13.103 - SAR Recording IP Video restricted/problematic
• LH3.14 showing waypoints labels after hiding the groups or waypoints
• AXIOM diagnostics list now updates/refreshes automatically
• Integration with Yamaha 6YG - MFD can calculate incorrect Trip value
• Fuel used can show incorrect value, if switching Data Master
• Cyclone near target expansion toggle now working as expected
• Sector blanking limits now move correctly, when Radar PPI shifts
• SONAR recording toggle switch added to diagnostics
• IGB tidal streams - updated around Aberdeen area to produce better current station graphs
• Various Mercury integration improvements
• Various system software upgrade process improvements
• Updated Cyclone Zero Azimuth offset functionality
• Radar target ID color modified so you can clearly see it when in night mode
• SONAR shallow depth warning limit trigger changed from 0.8m to 0.35m

v3.16.84 PRIME
Hvar

Download LightHouse 3.16.84

• Support for 2022 LightHouse Charts Ireland and Great Britain tides
• Support for the forthcoming YachtSense Link marine mobile router
• Various bug fixes and corrections including
  • Resolved a potential issue of data overlays freezing up
  • Corrected the white flash when using Navionics charts in night mode
  • Fixes to radar sector blanking
  • Guard zone alarm user interface improvements
  • 3D sonar background colour improved in night mode
  • Remedied a condition where CP sonar modules do not appear in the network diagnostics during an upgrade
• New RVX1000 update for compatibility with LightHouse HVAR 3.16.84 PRIME

v3.16.61

Hvar

New Features:

• Initial support for the new Cyclone Open Array Radars
• Nautical miles & yards (NM & yd) added as a unit of measure for distance
• Split screen LH3 browser app
• Cyclops Marine Load Cell support & data items added
• Improved sidebar selection panel
• Mercury - color coded alarm warning implementation
• Mercury - Information messages Pop-ups
• Mercury - Helm grouping
• Sector Blanking support for Quantum 2 Radars

Product improvements:

• Anchor mode now accounts for keel offset and waterline to deck measurement
• Transducer sea temperature calibration issue corrected
• Fathoms changed from fa to Fm
• "Follow from Here" not working in a route, under a certain condition - fixed
• Camera issue where surveillance scan stops working when selecting a different app - fixed
• Digital switching hidden pages were not staying hidden under certain conditions - fixed
• Improvements to 'Ping Depth Limit'
• Improvements to First Responder waypoint transfer over N2K
• Camera app (i.e. AR app) showing zoom options for non-zoom cameras (e.g. Cam210) - fixed
• Ruler updated to show correct range and bearing in context menu, and on ruler pop-up box
• Goto Ruler can sometimes navigate to wrong end - fixed
• iOS 15 prevented AXIOM connecting to it's hotspot - fixed
• Updated software for the AXIOM Pro rotary encoder, to prevent jumping when rapid scrolling/zooming
• In Augmented Reality view, a "T" has been added to make it obvious what the heading reference is, at the top of the screen
• CZone update so momentary buttons correctly reflect their status after switching pages
• Adjustments to the Raymarine database, to improve networking stability across the system (Only applicable if AXIOM/AXIOM DV/AXIOM RV models are in the network)
• AXIOM-Pro keypad buttons incorrectly waking up Pan/Tilt cameras. Now only the rotary controller wakes the camera as like swiping the screen
• Resolved a memory leak resulting in random MFD crashes, with systems running typically >16hours (depending on system load)
• When using a legacy Digital Radome (i.e. E92130 RD418D or E92132 RD424D), from MFD v3.15 certain range scales would show an incorrect PPI image - fixed
• Software upgrade improvements (System) - The Master MFD could crash (and not upgrade) if an RVX1000 was in the system and being upgraded. Could also occur if a repeater MFD did not report correctly. Implemented a fix in the v3.16 MFD code.
• Note: Upgrade improvements in this release will only be seen when performing a following software upgrade

v3.15.62

Guadeloupe

New Features:

• Reeds almanac now available with LightHouse charts
• LightHouse charts Tides and Currents now available for France
• Minimum depth warning message, when entering 0.8m or less
• Shallow depth alarm - configurable in the Alarms > Settings menu
• Anchor Drag wizard
• Renamed "Anchor Drift" to Position Drift" in the Alarms > Settings menu
• Mercury VesselView now supported in Horizontal or Vertical split screen modes
• Optional daily event grouping for waypoints
• Radar range ring customization - select the number of rings to display
• Additional GNSS Lat/Lon position format selections - now 6 to choose from
• Fuel Tanks can now be excluded from the Fuel Manager calculations
• Pitch is now available as a databox selection, located under the "Boat" category for data items
• Polar Table library update - we now have over 470 popular cruising and racing sailboats, built in
• Fish ID and Alarm features now available for all Fishfinder depth transducers (Raymarine and Airmar)
  • Note – only applicable if the transducer is connected directly to an AXIOM-series MFD or RVX1000. CP-Sounders, (e.g.: CP370/470/570) do not currently support this feature.
• Optional suppression of Dangerous Target alarms for stationary targets
• iKey Bluetooth keyboard and trackpad support - full details in user manual
• On-Screen auto focus control for M400 and M500 cameras
• Users can now follow a waypoint from within a route (follow from here), and can easily reverse the route - improved UI

First Responder:

• Waypoints can now be entered via Bearing and Range from a fixed point
• Import and Export of waypoints via NMEA0183
• Pin Lock
• If Heading or SOG data becomes unavailable, a warning message is shown on the Homescreen

Bug Fixes:

• Mercury VesselView - resolves an issue where no data was being displayed if the ignition was turned on, but the engines are not running
• 2nd Echo Rejection corrected/Improved
• Improvements to shallow water tracking and general performance
• Navionics subscription expired warning message box would keep popping up - fixed
• LightHouse charts subscription showing expired, but with a future date shown - fixed
• Realbathy depth curves are now drawn down to 0.25m increments
• MFD would state you have ejected the MicroSD card incorrectly, when you have not - fixed
• Engine data dampening has been improved, so that the master and repeater MFDs are more in sync
• When advancing a waypoint in a route, a repeater MFD could sometimes advance more than once - fixed
• Resolved an issue where the MFD would report "No Update Found" when inserting a software MicroSD card
• GNSS differential mode was incorrectly re-enabled when changing from GLONASS to BeiDou - fixed
• Implemented a fix to prevent the AXIOM from not detecting a LightHouse chart, after it has been updated
• Improvements for the detection of both Analogue and Digital IP cameras

v3.14.108

Fremantle

New Features:

• Continued SONAR bottom tracking improvements
• Addition of 4G router support (DHCP On/Off switch) and setup page (from AXIOM diagnostics)
• Polar tables library update

Bug Fixes:

• Corrects an issue where the MFD could crash when using RealBathy
• Corrects an issue with IP Cameras being discovered by the MFD
• Improvements to the UKHO tide stations, with regards to the display of some tidal curves
• Moved certain chart items out of Land Features, for the LightHouse charts
• Resolves an issue with Trigentic Digital Switching toggle switches, not functioning correctly on repeater MFDs
• Resolves an issue seen with mounting MicroSD cards on the MFD.

v3.14.88

Fremantle

New Features:

• Mercury Vessel View integration with App and SmartCraft Connect gateway
• Support for LightHouse Charts - North America
• Support for Hi-Resolution contours in Fishing Mode only
• LightHouse Charts - Improved Tides and Currents, and stations available in Great Britain/Ireland and France
• Continued SONAR bottom tracking improvements: Introduced a new feature to limit the maximum depth the SONAR will ping to, when trying to re-acquire a bottom lock (only applicable to AXIOM MFDs and RVX1000, when using high power Airmar transducers)

Bug Fixes:

• Dashboard databoxes can now be edited again, after customization - i.e. Trip
• Touch Swipe shortcut menu appearing due to electrical noise - New software written to prevent this
• Finnish translation for 'Knots' corrected
• System software upgrade improvements:
  • Slave MFD not entering 'Upgrade mode' when directed
  • MFD upgrade remaining on "In Progress" screen and never showing Complete
  • AXIOMs found to be downloading 2 upgrade files when only one is required
  • MFD cannot detect upgrades files on card, if the directory name contains spaces
  • IMPRTANT NOTE: These 'System Software Upgrade' improvements will not show positive results until the following software release (i.e. v3.15.xx)
• Changes to the RayNet communications - when upgrading to v3.14.88 you also need to upgrade any of the following products in your system to the specified versions below, otherwise they will not communicate correctly:
  • RMK-9: v20.0.7
  • RMK-10: v20.0.7
  • CP100: v20.0-00012 app / v18.00-00017 plat
  • CP200: v20.0-00012 app / v18.00-00017 plat
  • CP370: v20.0-00012 app / v18.00-00017 plat
  • CP470: v20.0-00012 app / v18.00-00017 plat
  • CP570: v20.0-00012 app / v18.00-00017 plat
  • RVX1000: v3.14.88
  • (Note - these new software versions are backward compatible with older MFD versions - i.e. LH2 v19.03 or LH3 v3.11.43)

Bug Fixes

• Resolves an issue on the Digital Switching pages, where the page title and page arrows appear when they should not.
• Fixes an issue where the screen shows a lot of blank boxes with a blank background.
• Resolves a crash when inserting a MicroSD card into the MFD, and you have Mercury device(s) on the N2K network.
• Includes the S63 CHART base map within the ISO file.

LH3.13.100 

Edgartown

New Features:

• Support for LightHouse Charts
• Support for C-Zone Plug and Play digital switching
• Radar Chart Synchronisation feature
• New 256 colour radar overlay palettes
• New nearby waypoints on radar feature
• Humidity & Internal temperature databoxes in Dashboard
• S63 encrypted chart support
• Support for the Oscar camera in LightHouse App
• New support for the AnyDesk remote desktop App 

Bug Fixes

• Sonar bottom acquisition improvements
• Improved logging tools for recording software upgrade failures
• Resolved an HDMI connection issue with Axiom XL displays

v3.12.217

Dartmouth

New Features:

• LightHouse 3 code updated to support DockSense product range

Bug Fix:

• No longer states "Cartography upgrade failed" popup message

v3.12.199

Dartmouth

New Features and Enhancements:

• Day and Night Viewing Modes
• Audio Sidebar Controller
• New LightHouse Apps
  • Lumitec Lighting (Hardware Dependent)
  • Quick Nautical Network (Hardware Dependent)
  • Kinetix Impact Mitigation (Hardware Dependent)
  • HP Watermakers (Hardware Dependent)
• Enhanced Fonts & Gauges
• Fish Detection Alarm
• Chartplotter Measuring Ruler
• Automatic Chart Recentering
• First Responder Waypoint Icons
• AIS Target Names All On/Off control

Bug fixes:

• Improvements to chart hot spotting
• Chart object information improvements
• exFAT memory card support
• New light home screen and menu color theme
• Full selection of data items for overlays and sidebars
• Arabic Keyboard for Waypoints and Routes
• AR chart objects from LightHouse Charts

v3.11.42

Cannes

Download for Axiom MFDs

New Features:

• Support for FLIR M300 Series cameras dual-stream visible and thermal payloads. Both visible and thermal video streams can now be viewed simultaneously across split-screen or multiple displays
• Fishidy Sync Support
• Expanding square SAR pattern added
• Support for AIS text messaging with AIS5000
• Victron battery management app
• iTC-5 calibration of depth, speed and wind sensors from the MFD
• Additional sailing polars added to the library
• Arabic keyboard support

Bug fixes:

• Fixed an issue with SiriusXM lightning strikes drawing at certain ranges
• Signal-to-noise issues fixed for internal Axiom and Axiom Pro sonars
• Incorrect Engine trim/tilt data and tank instancing resolved

v3.10.42

Bermuda

Bug fixes:

• Multiple Data Source selection on the AXIOM MFD was being blocked if certain products were connected (i.e. if an ITC-5, Converter, Actisense or Fusion was in the system)
• When using AXIOM XL Video In/Touch out, we have improved the touch output commands when a finger is held down on the AXIOM screen

Changes to .zip file contents since this release:

• The MFD Download is continuously having the latest ISO files added, so that you get the latest system product upgrades

v3.10.39

Bermuda

New Features:

• New LightHouse3 Apps
  • BUOYWEATHER
    • Worldwide Coastal and Offshore Weather
  • SHADOW-CASTER
    • LED Underwater and Vessel Lighting Control
  • PREDICTWIND & OFFSHORE
    • Provide Weather Routing and Departure Planning
• M132/M232
  • Video stabilization via AR200 augmented reality mode
    **not eS/gS Series
  • Thermal camera test and calibration via MFD
• Advanced Sailing Tools
  • New RACING chart mode selection
  • "Race Start" in left pop-in Side Bar
  • Race Timer enhancements
    • Toggle the time by 1 minute intervals
    • Sync and adjust by 1 minute intervals
  • New Start Line feature
    • Easily Ping or Hot Spot each end of the start line. Can also swap ends for up or down wind starts
    • Laylines now appear on Start Line, once Race Timer has started
    • New Data Items - i.e. Time to Burn, Line Bias, Distance to Line
  • New race dashboard - for Race Start (not standard sailing dash)
  • New data overlays on the screen (TWS, TWA, TWD, AWS, AWA)
  • New vessels in POLAR DATABASE from [email protected]
• SiriusXM SR200 support
  • Full SiriusXM Marine Weather and Satellite Radio support
  • Network-wide viewing and control
  • New Canadian Marine Zone forecast
• First Responder features (with the AIS5000)
• PDF Viewer
• Fishidy Sync
• Upgraded DJI SDK from v4.9 to v4.10
• MFD Diagnostic enhancements
  • IP Cameras now shown in a network scan
  • New menu option to Record NMEA2000 bus data direct to uSD card
  • Improved NMEA2000 descriptions/raw data viewability

Bug fixes in v3.10:

• Axiom & Axiom-Pro intermittently showing "No Transducer Connected"
• Axiom LH3.8 & Fusion audio FM stereo channel segment graphics overlapping the change arrows
• Dashboard app causing MFD to reboot (Certain Split screen app configuration)
• Navionics plotter sync not working
• Estonian language selected but shows English
• Race Timer on Dashboard stuck on 3h
• Quantum Radome and wired adaptor software update fails when AXIOM MFD running v3.9.46
• Camera motion menu missing when M132 is connected
• Cannot change number of tanks after MFD boat wizard completed
• Axiom-RV can re-boot when adaptor cable A80491 is connected
• Yamaha fuel tank is erased from system
• Navionics last update date is reporting incorrectly
• Intermittent Raynet data sharing from master MFD to repeaters
• LNC2 "show soundings" toggle does not work
• LNC2 spot soundings units selection now global
• With system units set to km the predicted area of danger is show incorrectly
• When filtering Static Targets or showing Crossing Targets only, the MFD was still showing All potential targets
• Minor Drone control improvements

Changes to .zip file contents since this release:

• The MFD Download is continuously having the latest ISO files added, so that you get the latest system product upgrades

v3.9.46

Annapolis

New Features:

• UAV Compatibility
  • New Model integration
  • DJI Mavic 2 Pro / Mavic 2 Zoom
• Laylines - active in sailing only
  • Up and Down Wind Angles
  • Distance to layline (distance to tack)
  • Time to layline (time to tack)
  • Sailing distance to WP (total for both legs)
  • Sailing time to WP (total for both legs)
  • Target boat speed
  • % of target boat speed achieved
• New Sailing Features
  • Steering guidance
  • Updated sailing dashboard
• New Sirius XM
  • SR200 support
  • AXIOM range only from LH3.9
  • Audio control across all networked MFDs
  • Weather control via Weather mode on data Master only
• New ClearCruise Augmented Reality features
  • ClearCruise AR is now compatible with the FLIR M132 and M232 Thermal Cameras
  • Non IP AR cameras can now be disabled in the menu
• Yamaha Command Link / Command Link Pro
  • Lighthouse3 v3.9.46 Setup
  • Configure Yamaha Dashboard page in Homescreen
  • Settings and Boat Details
  • Select Yamaha as engine manufacturer
  • Configure Yamaha display - Twin, Triple, Quad...
  • Select number of Batteries
  • Select number of Tanks
  • Compatibility: Yamaha In-Line F200 outboards and 4.2L V6 Offshore, all V8 F350 models and new F425 (V8 5.6L) in twin, triple or quad configurations
  • Eliminates need to fit Yamaha CL7 7" display
    • Requires NMEA2000 Gateway
    • P/N: 6YG-8A2D-00-00
    • Important: Helm Master functions (Fish Point, Drift Point and Stay Point) and joystick functionality require CL7
• SONAR - New Pinch to Zoom and Range Shift
  • Pinch out to initiate SONAR Zoom
  • Infinite zoom increments up to 8x the range
  • Works in auto and manual range
• Range Shift
  • Manual range to bottom of desired focus area
  • Pinch (out) to initiate SONAR zoom on focus area
  • Easily range deeper if area of interest shifts down
• Radar Sector Blanking
  • Define up to 2 sectors inside which no Radar data will be transmitted
  • Avoid transmitting into nearby object that may be sensitive to microwaves (e.g. Sat TV) or cause for poor performance (e.g. Metal Radar mounts)
  • Blanking occurs on the main Radar and Radar overlay on a chart
  • *Only available on Magnum Radars
• Video Playback
  • View Video files in MyFile locations
  • Open or Delete
  • Play/Pause, FF, RW
  • **there is no edit functionality for Video files currently. Therefore, you cannot move the stored file location or rename via the MFD
• Tank naming and Sender Calibration
  • New 10 Tank full screen and 8 Tank split screen layouts
• New Realbathy™
  • Personal SONAR Map generator
  • Real-time 1 foot contours
  • Variable overlay transparency
  • Safe depth colorization

Bug fixes:

• Center Starboard engine graphic on Quad Engine Layout incorect - now fixed
• CZone Dashboard "Configuration Conflict" Message - fixed
• CZone Imported mew configuration not used until system power cycled - now fixed
• CZone display conflict when CZone display in system - now fixed
• Cartography version is not reported on networked MFDs - now fixed
• Waypoints could lose their time stamp when used in a route - now fixed
• Waypoint sort issues - fixed
• Shallow water fishing range alarm increments incorrectly - now fixed
• Diagnostics list not updating with product info - fixed
• AXIOM intermittently failing to upgrade to latest software (v3.8.105) - now resolved
• Improvements to upgrading an AXIOM Pro/AXIOM XL via memory card

Changes to .zip file contents since this release:

• The MFD Download is continuously having the latest ISO files added, so that you get the latest system product upgrades

v3.8.105(AXIOM)

v3.8.105(eS/gS)

Bug fixes:

• Now correctly displays Spot Sounds when using LightHouse NOAA US vector charts
• Resolves an issue where Rockford Fosgate control via the MFD was intermittently lost.

Changes to .zip file contents since this release:

• The MFD Download is continuously having the latest ISO files added, so that you get the latest system product upgrades

New Features:

• CZone Digital Switching, Control and Monitoring
• JL Audio Media Master Remote Control
• Search and Rescue Patterns
• Collision Avoidance Predicted Area of Danger Overlay
• Dynamic Target Intercept Calculations
• Electronic Chart Synchronization
• LightHouse NC2 Electronic Chart Base Map
• LightHouse Charts Selectable Depth Coloring
• LORAN-C TD Support
• LightHouse Apps Manager (AXIOM family exclusive)
• Rudder Bar visable in Chart App "Sidebar" - even with Pilot control disabled
• HONK alarm output & Anchor alarm on SeaTalkng

Bug fixes:

• Waypoint import improvements
• RayControl connection improvements with certain Android Versions
• Various AR overlay improvements
• New Navionics Library - To stabilize intermittent performance issues
• Data Backup now working in Finnish language
• Quantum Radar "Connection Lost" issue improved on AXIOM/DV/RV
• Route/ Track/ Vector width change working as expected
• Fuel Manager - "Fuel Used" at Trip Month now working as expected
• GPS Priority - MFD now uses internal GPS as lowest priority

Changes to .zip file contents since this release:

• The MFD Download is continuously having the latest ISO files added, so that you get the latest system product upgrades

New Features:

• AR200 Augmented Reality support
• ClearCruise Target Range implemented when using M132 or M232 Cameras
• Seakeeper Integration Application
• Mazu-Marine mSeries Sentry System
• Backup and Restore feature implemented
  • Note:
    • Saving of Digital Switching pages are local to each display
    • Custom Splash Screens are not Backed up

Bug fixes:

• Czone/VesselView could cause an MFD Crash - now resolved
• Retention of Chart Range throughout exiting the chart app - now resolved
• Navionics changes:
  • Navigation Aids layer now defaulted to ON for the fishing chart
  • Additional Wrecks menu item (no longer used) removed
  • Resolved the inverted slider for aerial photo opacity/transparency
  • Fishing range highlights now defaulted to OFF for the fishing chart
• Waypoint names retained when a route is imported from GPX file
• Date used for Tide information could be incorrect - now resolved
• Quantum fixs:
  • Found an issue where the W3 board could have a missing S.N. preventing it from being s/w upgraded. V3.7.70 re-programs the S.N. if it is missing.
  • Resolves an issue where multiple presses of the Off Key from the Radar app, causes a crash.

Changes to .zip file contents since this release:

• The MFD Download is continuously having the latest ISO files added, so that you get the latest system product upgrades

New Features:

• Initial Release for AXIOM XL 22" hardware

Bug Fixes:

• MOB can trigger loss of HDMI output - resolved
• Touch Screen response improved with salt water spray
• FishFinder Simulator has been improved to show SONAR data on non-SONAR MFDs
• BlueTooth Sound Sync has been modified with HDMI output

New Features:

• Unmanned Aerial vehicle (UAV) integration support*
  • DJI Mavic Professional
  • DJI Mavic Professional Platinum Edition

Initial Release for AXIOM XL 24" hardware

Bug Fixes:

• Intermittent green screen SONAR
• Digital Switching Alert - alarm crash
• Digital Switching Alert - Momentary Button Down - Trigentic Firmware update v1.0.164

Note: RVX1000 requires new software (v3.6.32) to maintain MFD compatibility

*AXIOM Products only

New Features:

• LightHouse Apps*
  • Lumishore Lights App
• Audio App
  • Fusion Apollo support (770 and SRX400)
  • SR150 Audio for SiriusXM
• Bluetooth Alarm support*
• Demo movie
  • Plays from MicroSD card when in Simulator mode, after 60 seconds of inactivity
• PDF Viewer
  • PDF Documents read from MicroSD card
• Sonar RVX1000 enhancements
  • Supports RVX1000 error messages
  • Adds RVX1000 Sonar channels to the auto depth prioritisation model
• NMEA2000
  
  • Cummins C Command ED-4 electronics support for Remote Digital Alarm acknowledgement
  • PGN 127506 support (DC Detailed Status)
• RayNet
  
  • Navionics Charts networking enhancements between displays

Initial Release for AXIOM XL 19" hardware

Bug Fixes:

• Ground Log/Trip Reset option not resetting values
• Importing of .GPX files improved
• GPS filter not working correctly
• Not able to turn off/hide the Safety Distance ring
• Network Diagnostics information missing products
• Digital Switching alerts improved

*AXIOM/AXIOM-PRO/AXIOM XL only features

• Initial Release for AXIOM XL 16" hardware
• Recommended version for Magnum Radar compatibility
• Recommended version for RVX1000 SONAR compatibility

New Features:

•  LightHouse Apps*
  • Netflix
  • Spotify
  • GRIBview Weather App
• Chart additional features
  • Find Nearest
  • Tides Mode - tide and current graphs
• Bluetooth Audio Out*
  • Stream LightHouse 3 Entertainment App's
• Fuel Manager
  • Fuel range and economy settings
  • Honda ECO mode

Enhancements:

• Alarm Enhancements
  • Active alarm "Homebutton" alert
  • Alarm history
  • Digital Switching alarm selection
• Radar Enhancements
  • Support for Quantum 2 Doppler
  • Support for Digital Radar Software Upgrades
• Custom Startup Splash Screen*
• Shared Brightness Group Control

Bug Fixes:

• Fusion Power Off Issue
• Intermittent Navionics Chart Networking Issue
• Tide Time Offset Issue
• CP370 Selection Issue
• Import GPX files

*AXIOM/AXIOM-PRO only feature

• Radar enhancements
  • Enhanced AIS Target Overlay in Radar Mode
  • Radar True Trails
  • Radar ARPA Auto Target Acquisition
  • Quantum Software Updates Supported
• Weather Mode & SiriusXM SR150 Receiver
  • Support for SiriusXM SR150 receiver in new Weather Mode in charting app
  • Overlay weather data directly on your preferred cartography
  • Select and Animate weather layers from side menu
• Sonar Upgrades
  • RealVisionTM 3D Historical Sensitivity
  • Disable All Sonar
  • Depth & intensity Scale for 3D
  • Smooth Sonar Range Transition
• Navionics additional features
  • Plotter Sync
• Other Updates
  • Networked compatibility with eS and gS Series MFDs running LH3 v3.3.170
    • AXIOM or AXIOM-Pro set to Master
  • Supply Voltage data
  • Enhanced Diagnostics
  • Camera App - Cycling removed from v3.3 and planned to be reinstated in later version
• Various Bug fixes and improvements

• Improvements to the Wi-Fi firmware in all AXIOM Pro models.
  • No Change to AXIOM RV or AXIOM DV MFDs.

• Adjusted Backlight parameters at initial startup, for AXIOM Pro models

• Addressed satellite acquisition and GPS fix issue in select AXIOM models

• Initial Release for AXIOM Pro Models
• New features for all AXIOM models:
  • Wireless Display (Miracast) Streaming
  • Fusion Audio integration (CAN interface only)
  • Navionics Features:
    
    • Dock-to-Dock Autorouting (Autoroute to Here)*
    • Sonar Logging & SonarChart Live*
    • Panoramic Photos and Pilot Book (Platinum+ features)
    • Fishing Range and other advanced map features* *requires Freshest Data subscription
  • C-MAP integration
    • Essentials & 4DMAX/4DMAX+, Raster & Vector charts
    • Easy Routing (Autoroute to Here)* *requires C-MAP 4DMAX/4DMAX+ card
  • Sounder
    • RealVision 3D Nearby Waypoint Display
    • Expanded color palettes
    • Reverse Port/Starboard image Correction for certain step mount installations
  • Ability to upgrade STng Peripherals
    • Supports all STng ISO files currently online
  • New Languages - Croatian, Czech, Malay and Slovenian
  • Bug fixes

• Direct Control from the MFD of Evolution Autopilots
• Sonar Enhancements
  • Scrollback - 2D and 3D
  • Sensitivity History
  • GPS Tracks in 3D
  • 3D Waypoint placement
• Mobile App. Support – RayView / RayControl / RayRemote (with updated App’s)
• RMK-10 Full network multi-unit control
• Bug fix - GPS status No Fix on repeater
• Additional bug fixes
• Additional Languages:
  • Arabic
  • Brazilian Portuguese
  • Greek
  • Icelandic
  • Indonesian
  • Japanese
  • Korean
  • Latvian
  • Lithuanian
  • Russian
  • Simplified Chinese
  • Traditional Chinese
  • Vietnamese

• Changes to SONAR Y-Cables:
  • Allows ping on an Airmar Conical transducer when a Y-Cable is installed and Conical is not being viewed
  • Supports the DVS+Airmar Y-Cable (A80493 or A80486) that may be installed
  • Provides the ability to show all the SONAR channels available when using a Y-Cable
• Fix for a Language crash (GPS screen/Alarm dialogue)
• Fix for Autopilot Goto/Goto allowing an unacknowledged turn (not applicable to Evolution pilots).
• Allows the correct number of decimal places to be set in a Digital Switching page

• Initial Release for AXIOM 7DV SONAR unit
• Update for all networked AXIOM units (all networked units should be running the same version)

• Initial Release for AXIOM RV units
• Update for non-sonar unit network compatibility with RV units (all networked units should be running the same version)

• Initial Release