ACU-150 & ACU-400 product recall

Find out more
;

EV-400 Power Pilot

Autopilot for large powerboats with hydraulic steering

Product Options
EV-400 Power Pilot

EV-400 Power Overview

The EV-400 Power Pilot is the perfect solution for large powerboats with hydraulic steering.

The EV-400 Power Pilot kit includes the p70Rs color, rotary autopilot controller, EV-1 sensor core, ACU-400 actuator control unit, rotary rudder feedback unit, and an Evolution cabling kit.   

Choose any Type 2 or Type 3 hydraulic autopilot drive unit to complete the system.

EV-400 Power Pilot Key Features

  • Suitable for large powerboats with hydraulic steering systems
  • Works Type 2 or Type 3 hydraulic linear drives
  • Rotary rudder feedback sensor kit included
  • SeaTalkNG/NMEA2000 for networking with instruments and chartplotters
  • Requires no complicated setup or autopilot calibration. 
  • Includes the EV-1 sensor core. An intelligent 9-axis heading sensor that uses aerospace guidance technology to adapt and evolve to changing sea conditions and vessel dynamics
EV-1 intelligent sensor core

EV-400 Power Pilot System

Complete you autopilot system with any Type 2 or Type 3 hydraulic drive unit.

EV-400 Power Pilot System (suitable for Type 2 & 3 drives)

SKU: T70162
EV-400 Power Pilot System (suitable for Type 2 & 3 drives)

  • Works with Type 1, Type 2 or Type 3 mechanical or hydraulic drives.

  • Includes p70Rs control head

  • EV-1 Sensor Core Included

  • Includes ACU-400 actuator control unit

  • Rotary rudder reference sensor included

Find a Dealer

EV-400 Power Resources

Output
Drive clutch output

Up to 2.0 A continuous, selectable between 12 / 24 V
Drive current output

Maximum continuous 15 A at supply voltage
Physical
Dimensions

Width: 285 mm (11.2 in), Height: 211.5 mm (8.3 in), Depth: 64.5 mm (2.5 in)
Weight

2.2 kg (4.84 lbs)
Environmental
Relative humidity

Max. 93%
Waterproof rating

Drip resistant
Storage temperature

-30 °C to +70 °C (-22 °F to 158 °F)
Operating temperature

-20 °C to +55 °C (-4 °F to 131 °F)
Conformance
Standards

Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2
Power
Power consumption (standby) - main power supply

300 mA (12 / 24 V)
Power output to SeaTalkng bus

3 A @ 12 V (fuse protected at 3 A)
Power consumption (standby) - SeaTalkng bus

20 mA (12 V)
Nominal supply voltage

12 / 24 V dc
Operating voltage range

10.8 V dc to 31.2 V dc
LEN (NMEA 2000 Load Equivalency Number)

1
What's in the box?


1

ACU unit
2

Documentation
3

Screws (pan head type)
4

SeaTalkng spur to bare wires cable 1 m (3.3 ft)