ACU-150 & ACU-400 product recall

Find out more

;

ITC-5 Transducer Converter

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalk NG.

Product Options

Convert transducer signals to SeaTalk^NGwith ease

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalk^NG.

Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

Extended SeaTalk^NG systems can support multiple iTC-5 units.
SeaTalk^NG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalk^NG backbone.
Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).
If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers

SKU: E70010

Find a Dealer

Power
Power consumption	Typical: 1.5 W
Operating voltage range	9 - 16 V dc
Nominal supply voltage	12 V dc
Current	< 150 mA peak operating current
LEN (NMEA 2000 Load Equivalency Number)	3

Data connections
Connections	SeaTalkng backbone, 1 x SeaTalkng spur, 5 x transducer connections with spade terminals

Conformance
Standards	Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2