Aankondiging terugroepacties ACU-150 en ACU-400

    Meer informatie

    AIS5000 Software

    AIS5000 Software

    Software download and update information for the Raymarine AIS5000 product:

    • Applicable for: AIS5000
    • Software Version: AIS5000: MKD sw: 110405_020104 | Modem sw: 110200_020201
    • Release Date: September 2021
    Downloads

    AIS5000 Software Download

    (5.5MB)

    Important Terms of downloading software

    Firmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.

    If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

    By Downloading the software, you agree to these terms.

    Software History


    VersionRelease DateFeatures
    AIS5000
    MKD sw: 10405_02.03.01
    Modem sw: 110200_02.04.00    		Sept 2022AIS5000 STEDS functionality:
    • Support for commanding Message 6 in S3 Restricted mode
    • Support for commanding Messages 12 to 14 in S2 Normal mode using PGNs 129801 and 129802
    • AIS5000 “GPS only” GNSS mode is now retained once a factory reset is applied using the ‘Minimum
    Keyboard Display’ (MKD) menu option.
    AIS5000
    MKD sw: 110405_020104
    Modem sw: 110200_020201    		Sept 2021
    • Bridge Alert Management (BAM) to replace ALR alarms
    • Support for specific MOB and EPIRB alerts, instead of the generic 'SART active'
    • Support of SSA password sentence for the modem
    • Support of extended / convoy dimensions for SOLAS (Similar to Inland Waterways)
    • Update SRM operation so that received messages 12 /14 can be saved
    • Unit Type and Asset Type selections now possible via UIM
    • Unit Type and Asset Type fields now populated in NMEA 2000 PGN 65535 and NMEA 0183 sentences PUGG and PL3A
    • Updated using the new UI or via Command/Set messages
    AIS5000
    MKD sw: 110405_011900 | Modem: 110200_011500    		July 2021
    • BeiDou support
    AIS4000
    MKD SW: MKD_110405_012002    		April 2021
    • Changes to the NMEA200 screen, providing three separate source menus and allowing independent configuration based on the data type supported:
      • Heading source
      • ROT source
      • Position source
    AIS5000
    MKD SW: 110405.01.16.02
    AIS Modem: 110200.01.13.01    		Nov 2019
    • BUG – ONLY If the AIS5000 has a NMEA 2000 GNSS source set rather than relying on its own GNSS antenna then standard AIS position reports are still sent even if the mode is set to ‘Restricted’.
    • BUG – When transitioning to ‘Restricted’ mode from ‘Normal’ mode, standard AIS position reports on occasion will continue to be sent for up to a minute due to slot reservations.
    • FIRMWARE – The RF synthesiser component used in the AIS5000 is going obsolete. An alternative component has been fitted and this firmware accommodates for both the old and new RF synthesisers. There is no observable change/impact for the user.
    AIS5000
    MKD SW: 110405.01.16.02
    AIS Modem: 110200.01.11.00    		Aug 2019

    Modem software version 110200.01.11.00 changes are:

    • ABM message 6 requests in 'Restricted' mode is no longer possible
    • Sending of 'Safety Related Messages' (ITU 12/14) from the transponder in 'Restricted' mode is no longer possible
    • Sending of 'Safety Related Message ACKs' (ITU 13) from the transponder in 'Restricted' mode is no longer possible
    • ABK response to ITDMA scheduled requests in 'Restricted' mode is no longer possible
    • Sending of 'Communication Test Messages' from the transponder in 'Restricted' mode is no longer possible

    MKD software version 110405.01.16.02 changes are:

    • 'STEDs mode' icons are included in the status bar
    • Access is blocked to text message creation on the MKD when in restricted mode
    • Access is blocked to "Communication Test" when in restricted mode
    • Access is blocked to text message composition via 3 line buttons
    • Access is blocked to text message composition when in receive only mode
    • Access is blocked to "Communication Test" when in received only mode
    • Firmware version information is removed from MKD screens unless firmware update detected
    • Handles scenario when operational mode changes (externally) while on compose message screen
    • Handles scenario when operational mode changes (externally) while on Installation and AIS SART test screen
    AIS5000
    MKD SW: 110405.01.14.00
    AIS Modem: 110200.01.08.01    		Dec 2018
    • Initial Release


    Open Source GPL/LGPL

    Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals section of our website.

    To access the open source GPL and LGPL licensed executables click here