Quantum Radar Software

Software update to comply with the UK Product Security and Telecommunications Infrastructure Act 2022 ("PSTI") - Contains no end user performance changes or enhancements. For more information visit our FAQ.

Production release only, this is not available on the website – Any distributor/reseller requiring updates to their Quantum stock should contact us for further details. 

Release note

If you are already on v2.52 and you want to connect via Wifi to your chartplotter (Axiom or Element) then you will need to make sure that Axiom is on LH 4.6.148 and Element is on v3.19.17.

LH2 v19.03 will still connect to a Quantum radar on v2.52 via Wifi without the need for an upgrade.

Feature Improvements

• Ability to manually change the Wi-Fi channel within the Quantum (Note, requires the Axiom chartplotter to be running LightHouse 4.3 software to have access to the Menu)
  • This feature is applicable to all Quantum 2 and Quantum 1 radars running v2.44 software or higher
  • If your Quantum 1 is v1.62 or lower, this feature is not available and cannot be installed.

Resolved Issued & Improvements

• Software changes to support component changes
• Helps resolve an intermittent issue seen with some Quantum stating "Self Test Failure".

• Improved ISO file for Quantum1 and Quantum2 when performing software upgrades
• There are no end user performance changes or enhancements contained in this release for Quantum1
• Version 2.46 is functionally equivalent to the previously released version 1.62
• Either v1.62 or v2.46 will be installed, depending on your Quantum 1 hardware
• Software changes to support component changes

• There are no end-user performance changes or enhancements contained in this software release.
• Version 2.44 is functionally equivalent to the previously released version 1.62.
• If your Quantum is already running version 1.62, there is no need to upgrade its software.

v1.62 App

v1.17 W3

• Advertisement of the Quantum SSID via WiFi - Contact Product Support for assistance  
• Removal of the Quantum Recovery Mode (no longer required).
• WiFi Connecting before the Wired Connection - Timing and memory improvements to ensure previous connection methods are properly prioritized.
• Internal memory writing process improved, to prevent intermittent "Connection Lost" issues.
• Increased Time to Enter Sleep Mode, from 10 to 60 minutes
• Resolves an issue where multiple presses of the Off Key from the Radar app, causes a crash

• Resolves an issue whereby some units had "Transmitter Disabled" after a production line test, preventing the display of any Radar Targets.
• Note; If you are seeing Targets on your Multifunction Display screen, then there is no reason to upgrade from v1.50app to this v1.51app in the Quantum Radar.

v1.50 App

v1.16 W3

• General Performance improvements for Wi-Fi connectivity

• General Performance improvements for Hardware/PSU

• Improved PSU operation

v1.44 App

1.14 W3

• Changes to Low Voltage threshold
• Modifications for Production Tests
• Improvementrs to Short Range performance
• Modified network ID code
• Improved Pairing functionality
• General Bug fixes and improvements

• Improved tolerance for PA driver

v1.36 App

1.13 W3

• Initial Release