Annonce de rappel des produits ACU-150 et ACU-400
En savoir plus(585.6MB)
Firmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.
If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.
By Downloading the software, you agree to these terms.
Version | Release Date | Features |
v1.21 Base Map | Nov 2017 | Change to the Base Map revision to align with Production Line Machines.
|
v12.20 | Sept 2017 | Change to the User Interface to provide a better experience when connected to the new CPT-S-DF 20-degree transducer (A80545)
|
v12.10 | Nov 2016 | Delivers the following improvements:
|
v12.09 | Jan 2016 | Delivers the following improvements:
|
v12.08 | Jan 2016 |
|
v11.46 | April 2015 |
|
v11.45 | April 2015 |
|
v11.41 | Feb 2015 |
|
v10.10 | Oct 2014 |
|
v9.47 | April 2014 |
|
v9.40 | Feb 2014 |
|
v6.31 | April 2013 |
|
Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals section of our website.
To access the open source GPL and LGPL licensed executables click here
The following procedure addresses how one would populate a Flash memory card (Compact Flash/mSD) with software update files for the Multifunction Display (MFD) and then use this Flash memory card to update the MFD's software. Please note that product software updates may revert some MFD configuration settings back to the MFD's default settings. As such, it is recommended that customers make note of the MFD's configuration settings so that they may be used to reconfigure the MFD's settings after the MFD's software has been updated.
Note: microSD memory cards used with a/c/e/gS Series MFDs should have a memory capacity of no less than 512MB and no more than 32GB. CompactFlash cards should not exceed 128MB in size. If you are unable to obtain this size of card then you can try a card up to 2GB Max CF card at your own risk as early C and E Classic displays may have issues with CF cards larger than 128MB. In this instance we would recommend contacting your local Raymarine agent for them to perform the update.
Note: To avoid potentially corrupting the data on your chart card, DO NOT copy software update files to your chart card and DO NOT back up waypoint/route/track data to your chart card. MicroSD cards are commonly available in most stores selling consumer electronics products. Waypoint, route, track data, and system configuration data can be stored on a microSD memory card which also contains software update files.
It will be necessary to reset the MFD as the final step in the process of updating it. This procedure WILL erase any of the waypoints, routes and tracks that are currently stored within the MFD.
Note: one may use a single Flash memory card to both backing up the data within one’s MFD as well as for performing the software update. When using this Flash memory card for backing up the data within one’s MFD, be certain to not insert the memory card into the MFD’s memory card reader/writer until the MFD has been powered up and has completed its startup initialization.
The next stage is to update your MFD. Please choose the appropriate instructions below depending on what MFD you are using to perform the update. This update must be performed on all connected MFD's in the system. If there is connected MFDs in the system with different software versions you may experience spurious issues.
Note: Software updates do not have to be performed sequentially unless stated. It is fine to update from version 2.00 to version 5.00 and miss both version 3.00 and 4.00 if you have not previously installed them. All necessary information for the units to operate are included in the latest update.
This firmware update process is done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.
If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.
By Downloading the software, you agree to these terms.
Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals and Documents section of our website.
To access the open source GPL and LGPL licensed executables click here
IMPORTANT RESET INFORMATION
Historically, the Raymarine Technical Support teams have encouraged users to perform the power-on reset (also, known as factory reset, hard reset or master reset) on the Multifunction display products after a software upgrade. This nature of reset is not deemed necessary when upgrading with the Lighthouse II Release 11.xx software.
However, should you feel there is any reason to perform a reset, you should only have to perform the “Settings Reset” within the menu (Set-Up / Maintenance / System Settings Reset). This will retain the waypoints/ routes & tracks in the unit. The “Power-on Reset” should only be required if the MFD will not boot correctly
If you also have a CP300 or a CP450C and you want to take advantage of all the features in the latest SONAR software, then you will also need to upgrade your sonar module. You can download a detailed flow diagram that will guide you through the steps or alternatively, please contact your local Raymarine dealer for assistance.