Annonce de rappel des produits ACU-150 et ACU-400

    En savoir plus

    YachtSense Link Software Update

    YachtSense Link Software Update

    Software download and update information for Raymarine YachtSense Link marine mobile router

    • Bundle Version: V4.3
    • Release Date: August 2024

    Download Notes: Please ensure that your Axiom network is operating on LH4.7.172 before commencing any upgrade to your YachtSense Link router.

    Downloads

    Software Download

    (137MB)

    Important Terms of downloading software

    Firmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.

    If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

    By Downloading the software, you agree to these terms.

    Software History


    VersionDateDescription
    V4.3August 2024

    New Features and Improvements

    • Support for external Modem to be connected (WAN) on RayNet port 4 – e.g. Starlink
    • Support for a “Pulsed” output (e.g., for a trigger) instead of a constant high output
    • Resolved an issue where the Sailmon NavDesk mobile app on WiFi, was not communicating (through the YSL) with the E4 processor on RayNet, due to the YSL blocking the communications
    • Access Point WiFi speed improvements
    • Resolved an issue with obtaining an IP address over 4G on certain mobile networks (e.g. Verizon)
    • Issue with upgrading the software in the YSL now resolved, if the Axiom system is running LH4.6.148 (*see Summary below)
      • We implemented a fix in this YSL release, but you have to upgrade the YSL via a Laptop (without the Axiom connected) in order to install this new version
      • Alternatively, we have also fixed the issue in the LightHouse 4.7 software, so ensure you upgrade the Axiom system to LH4.7 (or higher) before upgrading the YSL via the Axiom
    • Resolved an issue where the YSL was factory resetting, causing symptoms like the WiFi Access Point password to revert back to default. This issue is the same as above “software upgrade” issue. So, it is resolved in v4.3 in the YSL and is also resolved in LH4.7 in the Axiom (*see Summary below)

    *Summary – combinations of software that resolve the previous two bullet points:

    • LH4.6 and v4.3 (YSL needs to be upgraded via Laptop – Axiom must not be connected via RayNet)
    • LH4.7 and v4.21
    • LH4.7 and v4.3 (Axiom must be upgraded first, then the YSL upgraded)
    CloudConnector V1.4August 2024
    • Momentary pulse now initiated when connecting to the boat via the app
    • Issue with YSL router not entering sleep mode now resolved
    • Improvements to app connectivity
    VersionDateDescription
    V4.21August 2023

    New Features

    • YachtSense Link now supports Over the Air updates, even if it is not on-boarded
    CloudConnector V1.2500August 2023

    Product Improvements

    • YachtSense Link optimised the amount of information being uploaded to the Cloud, so less data is being consumed
    • Adjusted Depth filtering when uploading to the cloud - Resolution now is 0.1m if <10m and 1m if =>10m
    V4.20August 2023

    New Features and Improvements

    • Implemented “Bridging” of data between the Wireless and RayNet networks on the YachtSense Router
    • Allow user to manually select a cellular network – Ideal when roaming

    Resolved Issued & Improvements

    • User Interface Improvements:
      • Within the Info section, now display the IPv4/IPv6 cellular status information
      • When disabling the SBAS satellites, it no longer deselects all of the SBAS constellations (this was annoying as one would have to reenable them one by one if they wanted to reenable SBAS)
    • Resolved an issue where the system was not obtaining an IPv6 address from the cellular provider
    • Implemented an advanced Modem Debug log, should additional information be required when fault finding
    • The "Connected Devices" page now shows up to 40 products (was previously limited to 20)
    • Resolved an issue where the data usage graph went blank on SIM2
    • Improvements to SIM1 and SIM2 switching functionality
    • Identified and resolved a high CPU usage issue
    • Improved the 'Access Point Name' (APN) settings and selection
    • Other general User Interface and operational improvements
    v1.73 N2K stackJune 2023
    • GPS fix timeout issue resolved on network
    • Improvements to prevent future GPS rollover issues
    • Corrected wind speed units from knots to m/s
    • General other minor improvements

    CloudConnector v1.20000


    		June 2023
    • Resolves an issue where the router I/O switch controls could intermittently not respond in the app, when off the vessel (control over the itnernet)
    • Engine Dynamic and Transmission Dynamic messages now correctly uploaded to the Raymarine app
    V4.17January 2023

    Resolved Issued & Improvements

    • Improved Crash Logs download, from YachtSense Link to MFD/MicroSD card
    • Updated User Interface to change references of "Rayconnect" to "Raymarine"
    • Resolves an IPV4 to IPV6 IP address processing issue, witnessed when using certain networks
    V141.232.412
    (4.12)    		August 2022
    • Required release for full support with the Raymarine App, when on-boarding the YachtSense Link router.
    • It is important that a router is "un-boarded" from the cloud, when it is no longer associated with the original user (e.g., the sale of a vessel/changing ownership of product/replacement etc.). This is done via the Raymarine App.
    V141.226.411
    (4.11)    		June 2022Initial Release

    Open Source GPL/LGPL

    Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals section of our website.

    The open source GPL and LGPL licensed executables can be located within the Yacht Sense Link calibration page help section.

    Software Update Instructions

    Please visit our FAQs for the latest update instructions.