Avviso di richiamo prodotti ACU-150 e ACU-400

    Approfondisci

    LightHouse 3 Software - For eS & gS series

    LightHouse 3 Software - For eS & gS series

    Software download and update information for the Raymarine LightHouse 3:

    • Applicable for: eS & gS Multifunction Displays Upgraded to LightHouse 3
    • Software Version: v3.11.42 – Cannes
    • Release Date: November 2019
    • Replaces: LH3.10.42
    Downloads

    LightHouse 3 - Software Download

    (732.3MB)

    Digital Switching Users

    Important - Please read before downloading if you are a Digital Switching User

    If you're running Digital Switching on your eS or gS Series MFD, it is not recommended that you upgrade your system to LightHouse 3.

    Please speak to the original installer of your Digital Switching service to have your files updated to LightHouse 3 prior to upgrading your system.

    Original Digital Switching installers include, but are not limited to: Raymarine, Trigentic, OEM's, or your Raymarine Dealer.

    Customer Notices

    Axiom Owners

    This version of LightHouse 3 is for eS & gS Series models only.

    Mixed System Owners

    LightHouse Cannes 3.11 is the last major LightHouse 3 software release to support eS and gS Series systems.

    As such, mixed systems of Axiom / Axiom XL and eS/gS Series displays must remain on LightHouse 3.11.42 or a prior release.

    IMPORTANT: Axiom+ multifunction displays cannot be downgraded to v3.11.42, and so are not compatible with eS/gS mixed LightHouse3 systems.

    NOTE: When upgrading to LightHouse 3.6 please ensure the DJI Radio Controller is NOT connected to the MFD.

    Important Terms of downloading software

    Firmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.

    If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

    By Downloading the software, you agree to these terms.

    Software history


    BundleRelease DateFeatures
    v3.11.42
    Cannes    		November 2019

    New Features:

    • Support for FLIR M300 Series cameras dual-stream visible and thermal payloads. Both visible and thermal video streams can now be viewed simultaneously across split-screen or multiple displays
    • Fishidy Sync Support
    • Expanding square SAR pattern added
    • Support for AIS text messaging with AIS5000
    • Victron battery management app
    • iTC-5 calibration of depth, speed and wind sensors from the MFD
    • Additional sailing polars added to the library
    • Arabic keyboard support

    Bug fixes:

    • Fixed an issue with SiriusXM lightning strikes drawing at certain ranges
    • Signal-to-noise issues fixed for internal Axiom and Axiom Pro sonars
    • Incorrect Engine trim/tilt data and tank instancing resolved
    v3.10.42 
    Bermuda    		August 2019

    Bug fixes:

    • Multiple Data Source selection on the AXIOM MFD was being blocked if certain products were connected (i.e. if an ITC-5, Converter, Actisense or Fusion was in the system)
    v3.10.39
    Bermuda    		July 2019

    New Features:

    • M132/M232
      • Thermal camera test and calibration via MFD
    • Advanced Sailing Tools
      • New RACING chart mode selection
      • "Race Start" in left pop-in Side Bar
      • Race Timer enhancements
        • Toggle the time by 1 minute intervals
        • Sync and adjust by 1 minute intervals
      • New Start Line feature
        • Easily Ping or Hot Spot each end of the start line. Can also swap ends for up or down wind starts
        • Laylines now appear on Start Line, once Race Timer has started
        • New Data Items - i.e. Time to Burn, Line Bias, Distance to Line
      • New race dashboard - for Race Start (not standard sailing dash)
      • New data overlays on the screen (TWS, TWA, TWD, AWS, AWA)
      • New vessels in POLAR DATABASE from [email protected]
    • SiriusXM SR200 support
      • Full SiriusXM Marine Weather and Satellite Radio support
      • Network-wide viewing and control
      • New Canadian Marine Zone forecast
    • First Responder features (with the AIS5000)
    • PDF Viewer
    • Fishidy Sync
    • MFD Diagnostic enhancements
      • IP Cameras now shown in a network scan
      • New menu option to Record NMEA2000 bus data direct to uSD card
      • Improved NMEA2000 descriptions/raw data viewability

    Bug fixes in v3.10:

    • Axiom LH3.8 & Fusion audio FM stereo channel segment graphics overlapping the change arrows
    • Dashboard app causing MFD to reboot (Certain Split screen app configuration)
    • Navionics plotter sync not working
    • Estonian language selected but shows English
    • Race Timer on Dashboard stuck on 3h
    • Quantum Radome and wired adaptor software update fails when AXIOM MFD running v3.9.46
    • Camera motion menu missing when M132 is connected
    • Cannot change number of tanks after MFD boat wizard completed
    • Yamaha fuel tank is erased from system
    • Navionics last update date is reporting incorrectly
    • Intermittent Raynet data sharing from master MFD to repeaters
    • LNC2 "show soundings" toggle does not work
    • LNC2 spot soundings units selection now global
    • With system units set to km the predicted area of danger is show incorrectly
    • When filtering Static Targets or showing Crossing Targets only, the MFD was still showing All potential targets
    v3.9.46
    Annapolis    		April 2019

    New Features:

    • Laylines - active in sailing only
      • Up and Down Wind Angles
      • Distance to layline (distance to tack)
      • Time to layline (time to tack)
      • Sailing distance to WP (total for both legs)
      • Sailing time to WP (total for both legs)
      • Target boat speed
      • % of target boat speed achieved
    • New Sailing Features
      • Steering guidance
      • Updated sailing dashboard
    • Yamaha Command Link / Command Link Pro
      • Lighthouse3 v3.9.46 Setup
      • Configure Yamaha Dashboard page in Homescreen
      • Settings and Boat Details
      • Select Yamaha as engine manufacturer
      • Configure Yamaha display - Twin, Triple, Quad...
      • Select number of Batteries
      • Select number of Tanks
      • Compatibility: Yamaha In-Line F200 outboards and 4.2L V6 Offshore, all V8 F350 models and new F425 (V8 5.6L) in twin, triple or quad configurations
      • Eliminates need to fit Yamaha CL7 7" display
        • Requires NMEA2000 Gateway
        • P/N: 6YG-8A2D-00-00
        • Important: Helm Master functions (Fish Point, Drift Point and Stay Point) and joystick functionality require CL7
    • SONAR - New Pinch to Zoom and Range Shift
      • Pinch out to initiate SONAR Zoom
      • Infinite zoom increments up to 8x the range
      • Works in auto and manual range
    • Range Shift
      • Manual range to bottom of desired focus area
      • Pinch (out) to initiate SONAR zoom on focus area
      • Easily range deeper if area of interest shifts down
    • Radar Sector Blanking
      • Define up to 2 sectors inside which no Radar data will be transmitted
      • Avoid transmitting into nearby object that may be sensitive to microwaves (e.g. Sat TV) or cause for poor performance (e.g. Metal Radar mounts)
      • Blanking occurs on the main Radar and Radar overlay on a chart
      • *Only available on Magnum Radars
    • Video Playback
      • View Video files in MyFile locations
      • Open or Delete
      • Play/Pause, FF, RW
      • **there is no edit functionality for Video files currently. Therefore, you cannot move the stored file location or rename via the MFD
    • Tank naming and Sender Calibration
      • New 10 Tank full screen and 8 Tank split screen layouts

    Bug fixes:

    • Center Starboard engine graphic on Quad Engine Layout incorect - now fixed
    • CZone Dashboard "Configuration Conflict" Message fixed
    • CZone Imported mew configuration not used until system power cycled - now fixed
    • CZone display conflict when CZone display in system - now fixed
    • Cartography version is not reported on networked MFDs - now fixed
    • Waypoints could lose their time stamp when used in a route - now fixed
    • Waypoint sort issues - fixed
    • Shallow water fishing range alarm increments incorrectly - now fixed
    v3.8.105Feb 2019

    Bug fixes:

    • Now correctly displays Spot Sounds when using LightHouse NOAA US vector charts
    • Resolves an issue where Rockford Fosgate control via the MFD was intermittently lost.
    v3.8.97Jan 2019

    New Features:

    • CZone Digital Switching, Control and Monitoring
    • JL Audio Media Master Remote Control
    • Search and Rescue Patterns
    • Collision Avoidance Predicted Area of Danger Overlay
    • Dynamic Target Intercept Calculations
    • Electronic Chart Synchronization
    • LightHouse NC2 Electronic Chart Base Map
    • LightHouse Charts Selectable Depth Coloring
    • LORAN-C TD Support
    • Rudder Bar visable in Chart App "Sidebar" - even with Pilot control disabled
    • HONK alarm output & Anchor alarm on SeaTalkng

    Bug fixes:

    • Waypoint import improvements
    • RayControl connection improvements with certain Android Versions
    • Various AR overlay improvements
    • New Navionics Library - To stabilize intermittent performance issues
    • Data Backup now working in Finnish language
    • Route/ Track/ Vector width change working as expected
    • Fuel Manager - "Fuel Used" at Trip Month now working as expected
    • GPS Priority - MFD now uses internal GPS as lowest priority
    v3.7.70Oct 2018

    New Features:

    • AR200 Augmented Reality support*
    • ClearCruise Target Range implemented when using M132 or M232 Cameras*
    • Seakeeper Integration Application*
    • Mazu-Marine mSeries Sentry System*
    • Backup and Restore feature implemented
      • Note: 
        • Saving of Digital Switching pages are local to each display
        • Custom Splash Screens are not Backed up  

    Bug fixes:

    • Czone/VesselView could cause an MFD Crash - now resolved
    • Retention of Chart Range throughout exiting the chart app - now resolved
    • Navionics changes:
      • Navigation Aids layer now defaulted to ON for the fishing chart
      • Additional Wrecks menu item (no longer used) removed
      • Resolved the inverted slider for aerial photo opacity/transparency
      • Fishing range highlights now defaulted to OFF for the fishing chart
    • Waypoint names retained when a route is imported from GPX file
    • Date used for Tide information could be incorrect - now resolved
    • Quantum fix: 
      • Found an issue where the W3 board could have a missing S.N. preventing it from being s/w upgraded. V3.7 re-programs the S.N. if it is missing.
      • Resolves an issue where multiple presses of the Off Key from the Radar app, causes a crash  

    * AXIOM/AXIOM-Pro/AXIOM-XL only feature

    v3.6.45Sept 2018

    New Features:

    • Initial Release for AXIOM XL 22" hardware

    Bug Fixes:

    • MOB can trigger loss of HDMI output - resolved
    • Touch Screen response improved with salt water spray
    • FishFinder Simulator has been improved to show SONAR data on non-SONAR MFDs
    • BlueTooth Sound Sync has been modified with HDMI output*

    * AXIOM/AXIOM-Pro/AXIOM-XL only feature

    v3.6.32July 2018

    New Features:

    • Unmanned Aerial vehicle (UAV) integration support*
      • DJI Mavic Professional 
      •  DJI Mavic Professional Platinum Edition  

    Initial Release for AXIOM XL 24" hardware 

    Bug Fixes:

    • Intermittent green screen SONAR
    • Digital Switching Alert - alarm crash
    • Digital Switching Alert - Momentary Button Down - Trigentic Firmware update v1.0.164

     Note: RVX1000 requires new software (v3.6.32) to maintain MFD compatibility

    *AXIOM Products only

    v3.5.4019 June 2018

    New Features:

    • LightHouse Apps*
      • Lumishore Lights App  
    • Audio App
      • Fusion Apollo support (770 and SRX400)
      • SR150 Audio for SiriusXM  
    • Bluetooth Alarm support*
    • Demo movie
      • Plays from MicroSD card when in Simulator mode, after 60 seconds of inactivity  
    • PDF Viewer
      • PDF Documents read from MicroSD card  
    • Sonar RVX1000 enhancements
      • Supports RVX1000 error messages
      • Adds RVX1000 Sonar channels to the auto depth prioritisation model  
    • NMEA2000
      • Cummins C Command ED-4 electronics support for Remote Digital Alarm acknowledgement
      • PGN 127506 support (DC Detailed Status)  
    • RayNet
      • Navionics Charts networking enhancements between displays  

    Initial Release for AXIOM XL 19" hardware 

    Bug Fixes:

    • Ground Log/Trip Reset option not resetting values
    • Importing of .GPX files improved
    • GPS filter not working correctly
    • Not able to turn off/hide the Safety Distance ring
    • Network Diagnostics information missing products
    • Digital Switching alerts improved

      *AXIOM/AXIOM-PRO/AXIOM XL only features

    v3.4.1021 June 2018
    • Initial Release for AXIOM XL 16" hardware
    • Recommended version for Magnum Radar compatibility (We advise an AXIOM MFD is in the system, set to Master)
    • Recommended version for RVX1000 SONAR compatibility (We advise an AXIOM MFD is in the system, set to Master)
    v3.4.66

    New Features:

    •  LightHouse Apps*
      • Netflix 
      • Spotify
      • GRIBview Weather App  
    • Chart additional features
      • Find Nearest
      • Tides Mode - tide and current graphs  
    • Bluetooth Audio Out*
      • Stream LightHouse Entertainment App's  
    • Fuel Manager
      • Fuel range and economy settings
      • Honda ECO mode  

    Enhancements: 

    • Alarm Enhancements
      • Active alarm "Homebutton" alert 
      • Alarm history
      • Digital Switching alarm selection  
    • Radar Enhancements
      • Support for Quantum 2 Doppler (We advise an AXIOM MFD is in the system, set to Master)
      • Support for Digital Radar Software Upgrades  
    • Custom Startup Splash Screen*
    • Shared Brightness Group Control

    Bug Fixes:

    • Fusion Power Off Issue
    • Intermittent Navionics Chart Networking Issue
    • Tide Time Offset Issue
    • CP370 Selection Issue
    • Import GPX files

    *AXIOM/AXIOM-PRO only feature

    For more information please visit LightHouse 3.4 Overview page

    v3.3.170Jan 2018
    • New LightHouse 3 on eS and gS Series multifunction displays. eS and gS display upgraded to LightHouse 3.3 can now network with Axiom or Axiom Pro displays


    Open Source GPL/LGPL

    Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals section of our website.

    To access the open source GPL and LGPL licensed executables click here

    LightHouse 3 Software Update Instructions for eS Series & gS Series MFDs

    USER UPDATE INFORMATION

    Please fully read this page before attempting to update your Raymarine System. This page contains each step for you to sucessfully update your Raymarine system.

    LightHouse 3.3 Compatibility Note

    Raymarine eS & gS Series owners can now enjoy the many new benefits of LightHouse 3. Please be aware that there are a number of LightHouse II features that have not yet migrated to LightHouse 3. Before upgrading any of your eS or gS multifunction displays to LightHouse 3.3 please be sure to review and understand the LightHouse II to LightHouse 3 feature comparison list.

    Legacy aSeries, cSeries and eSeries Compatibility

    After extensive testing we have determined that legacy aSeries, cSeries, and eSeries products running LightHouse II do not have sufficient memory and processor resources available to run LightHouse 3 at an acceptable level of performance. MFDs in these series will not accept the LightHouse 3.3 update.

    It is not possible to mix a, c, or e Series running Light House II with ANY products running LightHouse 3.

    DIGITAL SWITCHING NOTICE

    Any systems used to control a Digital Switching system should not be updated without first ensuring you have new files specific to the vessel to restore the Digital Switching pages. Graphics files used on LightHouse II systems are NOT compatible with LightHouse 3 and will need to be converted. Digital Switching files are usually held by the Boat Builder, Raymarine or Trigentic.

    UPDATE INSTRUCTIONS

    Please fully read this section before attempting to update your Raymarine System.

    This section contains each step for you to sucessfully update your Raymarine system.

    1. BACKING UP DATA

    Before performing any software, update or reset, Raymarine users are recommended to back up their waypoints, route and track data... this procedure is detailed as follows:

    1. Insert your mSD into the card slot
    2. Touch the 'My Data' button on the Homescreen
    3. Touch 'Import/Export' button on the My Data Screen
    4. Touch 'Save my Data' to bring up the options popup
    5. Choose from the options what you wish to save:
      • Save all Data
      • Save Waypoints
      • Save Routes
      • Save Tracks

    Note: When selecting either 'Save waypoints', 'Save Routes' or 'Save Tracks' you will be prompted to choose which you wish to save.

    IMPORTANT TERMS OF DOWNLOADING SOFTWARE

    This firmware update process is done at your own risk. Before initiating the update process be sure to backup and make copies of all important files. 

    If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

    By Downloading the software, you agree to these terms. 

    2. PERFORMING THE UPDATE

    eS and gS MFD’s being updated from LightHouse II to LightHouse 3 MUST use software from a MicroSD card.

    1. Download the latest ISO file from the Raymarine Website
    2. Copy the file on to a MicroSD Card - Ensure the card is formatted to FAT32 or NTFS.
    3. With all displays on the network powered up, insert the MicroSD card into any available card reader slot on an eS Display or into any slot on a RCR-2 card reader connected to a gS Display.
    4. From the Home page select: Set-up > Maintenance > Check Card for Updates.
    5. The system will check the card and networked devices for software.
    6. Having seen the software file on the card the MFD will remind you that this could take time. Press “OK”.
    7. At this stage a list of the products on the network will be displayed but the “Available” column will not be populated.
    8. Touch and hold an “Available“ cell and a pop-up will indicate the availability of software 3.3.170. Press “Install”.
    9. Selecting “Install” will return to the list with the product ticked for update. This can be repeated for each product on the list or they can be ticked directly by touching the select square. Each product that is selected will be marked for “Re-install”.
    10. The software update will start on all the networked products selected.
    11. As each unit is updated the Raymarine Software Upgrade page will be visible.
    12. The Display will restart and return to the new LightHouse 3 Home Screen once the update is completed.

    3. CONFIRMATION OF SUCCESSFUL SOFTWARE UPGRADE

    You can check software versions in 2 places:

    Settings > Getting Started

    Settings > Network (touch the "This Display" bar)

    4. IMPORTANT RESET INFORMATION

    Historically, Raymarine has encouraged users to perform a reset on the Multifunction Display products after a software upgrade however this is not deemed necessary when upgrading Lighthouse 3 software releases.

    Settings Reset

    Should you feel there is any reason to perform a reset, you should only have to perform the “Settings Reset” in the menu (Settings > This Display > Settings Reset). This will retain the waypoints/ routes & tracks in the unit.

    Factory Reset

    If, after performing the “Settings Reset”, the Multifunction Display product fails to operate satisfactorily, it may be necessary to perform the “Factory Reset” in the menu (Settings > This Display > Factory Reset) this will delete all saved dataand return the display to the initial setup procedure of the Start-up Wizard.