LightHouse 3 Software - For eS & gS series

Software download and update information for the Raymarine LightHouse 3:

Applicable for: eS & gS Multifunction Displays Upgraded to LightHouse 3
Software Version: v3.11.42 – Cannes
Release Date: November 2019
Replaces: LH3.10.42

Downloads

LightHouse 3 - Software Download

(732.3MB)

Digital Switching Users

Important - Please read before downloading if you are a Digital Switching User

If you're running Digital Switching on your eS or gS Series MFD, it is not recommended that you upgrade your system to LightHouse 3.

Please speak to the original installer of your Digital Switching service to have your files updated to LightHouse 3 prior to upgrading your system.

Original Digital Switching installers include, but are not limited to: Raymarine, Trigentic, OEM's, or your Raymarine Dealer.

Customer Notices

Axiom Owners

This version of LightHouse 3 is for eS & gS Series models only.

Mixed System Owners

LightHouse Cannes 3.11 is the last major LightHouse 3 software release to support eS and gS Series systems.

As such, mixed systems of Axiom / Axiom XL and eS/gS Series displays must remain on LightHouse 3.11.42 or a prior release.

IMPORTANT: Axiom+ multifunction displays cannot be downgraded to v3.11.42, and so are not compatible with eS/gS mixed LightHouse3 systems.

NOTE: When upgrading to LightHouse 3.6 please ensure the DJI Radio Controller is NOT connected to the MFD.

Important Terms of downloading software

Firmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.

If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

By Downloading the software, you agree to these terms.

Software history

Bundle	Release Date	Features
v3.11.42 Cannes	November 2019	New Features: Support for FLIR M300 Series cameras dual-stream visible and thermal payloads. Both visible and thermal video streams can now be viewed simultaneously across split-screen or multiple displays Fishidy Sync Support Expanding square SAR pattern added Support for AIS text messaging with AIS5000 Victron battery management app iTC-5 calibration of depth, speed and wind sensors from the MFD Additional sailing polars added to the library Arabic keyboard support Bug fixes: Fixed an issue with SiriusXM lightning strikes drawing at certain ranges Signal-to-noise issues fixed for internal Axiom and Axiom Pro sonars Incorrect Engine trim/tilt data and tank instancing resolved
v3.10.42 Bermuda	August 2019	Bug fixes: Multiple Data Source selection on the AXIOM MFD was being blocked if certain products were connected (i.e. if an ITC-5, Converter, Actisense or Fusion was in the system)
v3.10.39 Bermuda	July 2019	New Features: M132/M232 Thermal camera test and calibration via MFD Advanced Sailing Tools New RACING chart mode selection "Race Start" in left pop-in Side Bar Race Timer enhancements Toggle the time by 1 minute intervals Sync and adjust by 1 minute intervals New Start Line feature Easily Ping or Hot Spot each end of the start line. Can also swap ends for up or down wind starts Laylines now appear on Start Line, once Race Timer has started New Data Items - i.e. Time to Burn, Line Bias, Distance to Line New race dashboard - for Race Start (not standard sailing dash) New data overlays on the screen (TWS, TWA, TWD, AWS, AWA) New vessels in POLAR DATABASE from [email protected] SiriusXM SR200 support Full SiriusXM Marine Weather and Satellite Radio support Network-wide viewing and control New Canadian Marine Zone forecast First Responder features (with the AIS5000) PDF Viewer Fishidy Sync MFD Diagnostic enhancements IP Cameras now shown in a network scan New menu option to Record NMEA2000 bus data direct to uSD card Improved NMEA2000 descriptions/raw data viewability Bug fixes in v3.10: Axiom LH3.8 & Fusion audio FM stereo channel segment graphics overlapping the change arrows Dashboard app causing MFD to reboot (Certain Split screen app configuration) Navionics plotter sync not working Estonian language selected but shows English Race Timer on Dashboard stuck on 3h Quantum Radome and wired adaptor software update fails when AXIOM MFD running v3.9.46 Camera motion menu missing when M132 is connected Cannot change number of tanks after MFD boat wizard completed Yamaha fuel tank is erased from system Navionics last update date is reporting incorrectly Intermittent Raynet data sharing from master MFD to repeaters LNC2 "show soundings" toggle does not work LNC2 spot soundings units selection now global With system units set to km the predicted area of danger is show incorrectly When filtering Static Targets or showing Crossing Targets only, the MFD was still showing All potential targets
v3.9.46 Annapolis	April 2019	New Features: Laylines - active in sailing only Up and Down Wind Angles Distance to layline (distance to tack) Time to layline (time to tack) Sailing distance to WP (total for both legs) Sailing time to WP (total for both legs) Target boat speed % of target boat speed achieved New Sailing Features Steering guidance Updated sailing dashboard Yamaha Command Link / Command Link Pro Lighthouse3 v3.9.46 Setup Configure Yamaha Dashboard page in Homescreen Settings and Boat Details Select Yamaha as engine manufacturer Configure Yamaha display - Twin, Triple, Quad... Select number of Batteries Select number of Tanks Compatibility: Yamaha In-Line F200 outboards and 4.2L V6 Offshore, all V8 F350 models and new F425 (V8 5.6L) in twin, triple or quad configurations Eliminates need to fit Yamaha CL7 7" display Requires NMEA2000 Gateway P/N: 6YG-8A2D-00-00 Important: Helm Master functions (Fish Point, Drift Point and Stay Point) and joystick functionality require CL7 SONAR - New Pinch to Zoom and Range Shift Pinch out to initiate SONAR Zoom Infinite zoom increments up to 8x the range Works in auto and manual range Range Shift Manual range to bottom of desired focus area Pinch (out) to initiate SONAR zoom on focus area Easily range deeper if area of interest shifts down Radar Sector Blanking Define up to 2 sectors inside which no Radar data will be transmitted Avoid transmitting into nearby object that may be sensitive to microwaves (e.g. Sat TV) or cause for poor performance (e.g. Metal Radar mounts) Blanking occurs on the main Radar and Radar overlay on a chart Only available on Magnum Radars Video Playback View Video files in MyFile locations Open or Delete Play/Pause, FF, RW *there is no edit functionality for Video files currently. Therefore, you cannot move the stored file location or rename via the MFD Tank naming and Sender Calibration New 10 Tank full screen and 8 Tank split screen layouts Bug fixes: Center Starboard engine graphic on Quad Engine Layout incorect - now fixed CZone Dashboard "Configuration Conflict" Message fixed CZone Imported mew configuration not used until system power cycled - now fixed CZone display conflict when CZone display in system - now fixed Cartography version is not reported on networked MFDs - now fixed Waypoints could lose their time stamp when used in a route - now fixed Waypoint sort issues - fixed Shallow water fishing range alarm increments incorrectly - now fixed
v3.8.105	Feb 2019	Bug fixes: Now correctly displays Spot Sounds when using LightHouse NOAA US vector charts Resolves an issue where Rockford Fosgate control via the MFD was intermittently lost.
v3.8.97	Jan 2019	New Features: CZone Digital Switching, Control and Monitoring JL Audio Media Master Remote Control Search and Rescue Patterns Collision Avoidance Predicted Area of Danger Overlay Dynamic Target Intercept Calculations Electronic Chart Synchronization LightHouse NC2 Electronic Chart Base Map LightHouse Charts Selectable Depth Coloring LORAN-C TD Support Rudder Bar visable in Chart App "Sidebar" - even with Pilot control disabled HONK alarm output & Anchor alarm on SeaTalkng Bug fixes: Waypoint import improvements RayControl connection improvements with certain Android Versions Various AR overlay improvements New Navionics Library - To stabilize intermittent performance issues Data Backup now working in Finnish language Route/ Track/ Vector width change working as expected Fuel Manager - "Fuel Used" at Trip Month now working as expected GPS Priority - MFD now uses internal GPS as lowest priority
v3.7.70	Oct 2018	New Features: AR200 Augmented Reality support* ClearCruise Target Range implemented when using M132 or M232 Cameras* Seakeeper Integration Application* Mazu-Marine mSeries Sentry System* Backup and Restore feature implemented Note: Saving of Digital Switching pages are local to each display Custom Splash Screens are not Backed up Bug fixes: Czone/VesselView could cause an MFD Crash - now resolved Retention of Chart Range throughout exiting the chart app - now resolved Navionics changes: Navigation Aids layer now defaulted to ON for the fishing chart Additional Wrecks menu item (no longer used) removed Resolved the inverted slider for aerial photo opacity/transparency Fishing range highlights now defaulted to OFF for the fishing chart Waypoint names retained when a route is imported from GPX file Date used for Tide information could be incorrect - now resolved Quantum fix: Found an issue where the W3 board could have a missing S.N. preventing it from being s/w upgraded. V3.7 re-programs the S.N. if it is missing. Resolves an issue where multiple presses of the Off Key from the Radar app, causes a crash * AXIOM/AXIOM-Pro/AXIOM-XL only feature
v3.6.45	Sept 2018	New Features: Initial Release for AXIOM XL 22" hardware Bug Fixes: MOB can trigger loss of HDMI output - resolved Touch Screen response improved with salt water spray FishFinder Simulator has been improved to show SONAR data on non-SONAR MFDs BlueTooth Sound Sync has been modified with HDMI output* * AXIOM/AXIOM-Pro/AXIOM-XL only feature
v3.6.32	July 2018	New Features: Unmanned Aerial vehicle (UAV) integration support* DJI Mavic Professional DJI Mavic Professional Platinum Edition Initial Release for AXIOM XL 24" hardware Bug Fixes: Intermittent green screen SONAR Digital Switching Alert - alarm crash Digital Switching Alert - Momentary Button Down - Trigentic Firmware update v1.0.164 Note: RVX1000 requires new software (v3.6.32) to maintain MFD compatibility *AXIOM Products only
v3.5.40	19 June 2018	New Features: LightHouse Apps* Lumishore Lights App Audio App Fusion Apollo support (770 and SRX400) SR150 Audio for SiriusXM Bluetooth Alarm support* Demo movie Plays from MicroSD card when in Simulator mode, after 60 seconds of inactivity PDF Viewer PDF Documents read from MicroSD card Sonar RVX1000 enhancements Supports RVX1000 error messages Adds RVX1000 Sonar channels to the auto depth prioritisation model NMEA2000 Cummins C Command ED-4 electronics support for Remote Digital Alarm acknowledgement PGN 127506 support (DC Detailed Status) RayNet Navionics Charts networking enhancements between displays Initial Release for AXIOM XL 19" hardware Bug Fixes: Ground Log/Trip Reset option not resetting values Importing of .GPX files improved GPS filter not working correctly Not able to turn off/hide the Safety Distance ring Network Diagnostics information missing products Digital Switching alerts improved *AXIOM/AXIOM-PRO/AXIOM XL only features
v3.4.102	1 June 2018	Initial Release for AXIOM XL 16" hardware Recommended version for Magnum Radar compatibility (We advise an AXIOM MFD is in the system, set to Master) Recommended version for RVX1000 SONAR compatibility (We advise an AXIOM MFD is in the system, set to Master)
v3.4.66		New Features: LightHouse Apps* Netflix Spotify GRIBview Weather App Chart additional features Find Nearest Tides Mode - tide and current graphs Bluetooth Audio Out* Stream LightHouse Entertainment App's Fuel Manager Fuel range and economy settings Honda ECO mode Enhancements: Alarm Enhancements Active alarm "Homebutton" alert Alarm history Digital Switching alarm selection Radar Enhancements Support for Quantum 2 Doppler (We advise an AXIOM MFD is in the system, set to Master) Support for Digital Radar Software Upgrades Custom Startup Splash Screen* Shared Brightness Group Control Bug Fixes: Fusion Power Off Issue Intermittent Navionics Chart Networking Issue Tide Time Offset Issue CP370 Selection Issue Import GPX files *AXIOM/AXIOM-PRO only feature For more information please visit LightHouse 3.4 Overview page
v3.3.170	Jan 2018	New LightHouse 3 on eS and gS Series multifunction displays. eS and gS display upgraded to LightHouse 3.3 can now network with Axiom or Axiom Pro displays

Open Source GPL/LGPL

Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals section of our website.

To access the open source GPL and LGPL licensed executables click here

LightHouse 3 Software Update Instructions for eS Series & gS Series MFDs

USER UPDATE INFORMATION

Please fully read this page before attempting to update your Raymarine System. This page contains each step for you to sucessfully update your Raymarine system.

LightHouse 3.3 Compatibility Note

Raymarine eS & gS Series owners can now enjoy the many new benefits of LightHouse 3. Please be aware that there are a number of LightHouse II features that have not yet migrated to LightHouse 3. Before upgrading any of your eS or gS multifunction displays to LightHouse 3.3 please be sure to review and understand the LightHouse II to LightHouse 3 feature comparison list.

Legacy aSeries, cSeries and eSeries Compatibility

After extensive testing we have determined that legacy aSeries, cSeries, and eSeries products running LightHouse II do not have sufficient memory and processor resources available to run LightHouse 3 at an acceptable level of performance. MFDs in these series will not accept the LightHouse 3.3 update.

It is not possible to mix a, c, or e Series running Light House II with ANY products running LightHouse 3.

DIGITAL SWITCHING NOTICE

Any systems used to control a Digital Switching system should not be updated without first ensuring you have new files specific to the vessel to restore the Digital Switching pages. Graphics files used on LightHouse II systems are NOT compatible with LightHouse 3 and will need to be converted. Digital Switching files are usually held by the Boat Builder, Raymarine or Trigentic.

UPDATE INSTRUCTIONS

Please fully read this section before attempting to update your Raymarine System.

This section contains each step for you to sucessfully update your Raymarine system.

1. BACKING UP DATA

Before performing any software, update or reset, Raymarine users are recommended to back up their waypoints, route and track data... this procedure is detailed as follows:

Insert your mSD into the card slot
Touch the 'My Data' button on the Homescreen
Touch 'Import/Export' button on the My Data Screen
Touch 'Save my Data' to bring up the options popup
Choose from the options what you wish to save:
- Save all Data
- Save Waypoints
- Save Routes
- Save Tracks

Note: When selecting either 'Save waypoints', 'Save Routes' or 'Save Tracks' you will be prompted to choose which you wish to save.

IMPORTANT TERMS OF DOWNLOADING SOFTWARE

This firmware update process is done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.

If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

By Downloading the software, you agree to these terms.

2. PERFORMING THE UPDATE

eS and gS MFD’s being updated from LightHouse II to LightHouse 3 MUST use software from a MicroSD card.

Download the latest ISO file from the Raymarine Website
Copy the file on to a MicroSD Card - Ensure the card is formatted to FAT32 or NTFS.
With all displays on the network powered up, insert the MicroSD card into any available card reader slot on an eS Display or into any slot on a RCR-2 card reader connected to a gS Display.
From the Home page select: Set-up > Maintenance > Check Card for Updates.
The system will check the card and networked devices for software.
Having seen the software file on the card the MFD will remind you that this could take time. Press “OK”.
At this stage a list of the products on the network will be displayed but the “Available” column will not be populated.
Touch and hold an “Available“ cell and a pop-up will indicate the availability of software 3.3.170. Press “Install”.
Selecting “Install” will return to the list with the product ticked for update. This can be repeated for each product on the list or they can be ticked directly by touching the select square. Each product that is selected will be marked for “Re-install”.
The software update will start on all the networked products selected.
As each unit is updated the Raymarine Software Upgrade page will be visible.
The Display will restart and return to the new LightHouse 3 Home Screen once the update is completed.

3. CONFIRMATION OF SUCCESSFUL SOFTWARE UPGRADE

You can check software versions in 2 places:

Settings > Getting Started

Settings > Network (touch the "This Display" bar)

4. IMPORTANT RESET INFORMATION

Historically, Raymarine has encouraged users to perform a reset on the Multifunction Display products after a software upgrade however this is not deemed necessary when upgrading Lighthouse 3 software releases.

Settings Reset

Should you feel there is any reason to perform a reset, you should only have to perform the “Settings Reset” in the menu (Settings > This Display > Settings Reset). This will retain the waypoints/ routes & tracks in the unit.

Factory Reset

If, after performing the “Settings Reset”, the Multifunction Display product fails to operate satisfactorily, it may be necessary to perform the “Factory Reset” in the menu (Settings > This Display > Factory Reset) this will delete all saved dataand return the display to the initial setup procedure of the Start-up Wizard.

Lea nuestro último Informe de Sostenibilidad